What is Spraying?

What tool to choose for painting?

How do I use the spraying tool?

spray coating

With the help of air pressure, the paint is dispersed into fine, homogeneous atomized particles that are then sprayed to cover the surface of the part.

Spraying tool selection

For more information, please refer to another article "Model Spraying - Tools"

Use of spraying tools

Connect the airbrush and air pump through the trachea

Pour the diluted paint into the pen jug

Use of airbrushes

Press the trigger button down to control the air outlet

Pull the trigger back to control the amount of paint

Airbrush control training

In the case of fixed paint volume, it can be seen that the farther the airbrush is from the paper surface, the more virtual the coloring surface will be, and the atomization effect will decrease; in the case of fixed distance, it can be seen that the larger the paint output, the larger the coloring area, and the more solid the line;

Finally, don't forget to wash your airbrush!

Add pen wash to the jug

Method 1: Block the mouth of the airbrush with your fingers or dust-free paper, press the trigger button and pull back slowly

Method 2: Loosen the second section of the front end of the airbrush, and then press the trigger button

You can see bubbles coming out of the kettle, forming a backflow, be careful not to splash out the washing airbrush liquid. After repeated reflow spraying, the remaining paint in the airbrush is cleaned.

Cleaning the airbrush after each use can extend the life of the airbrush.

J-PEN makes spraying easier!